Rajagedara: List of British Standards (BS) - Civil Engineering ·•●★ Anything Everything ★●•·

BS 4-1 1993 Structural steel sections

Part 1: Specification for hot-rolled sections

Incorporating Amendment No. 1

BS 12 1996 Specification for

Portland cement

BS 146 1996 Specification for

Portland blastfurnace cements

BS 410-1 2000 Test sieves – Technical requirements and testing

(ISO 3310-1 2000) Part 1: Test sieves of metal wire cloth

BS 410-2 2000 Test sieves – Technical requirements and testing

(ISO 3310-2 1999) Part 2: Test sieves of perforated metal plate

BS 449-2 1969 Specification for The use of structural steel in building

Part 2: Metric units

Incorporating amendments issued:

January 1970 (AMD 416)

May 1970 (AMD 523)

December 1970 – AMD 661

April 1973 – AMD 1135

July 1975 – AMD 1787

August 1984 – AMD 4576

May 1988 – AMD 5698

December 1989 – AMD 6255

Amendment No.9

BS 476-10 1983 Fire tests on building materials and structures

Part 10: Guide to the principles and application of fire testing

BS 476-11 1982 Fire tests on building materials and structures

Part 11: Method for assessing the heat emission from building materials

(Confirmed March 1998)

BS 476-12 1991 Fire tests on building materials and structures

Part 12: Method of test for ignitability of products by direct flame impingement

BS 476-13 1987 Fire tests on building materials and structures

ISO 5657 1986 Part 12: Method of measuring the ignitability of products subjected to thermal irradiance

(ISO title: Fire test – Reaction to fire – Ignitability of building products)

Incorporating Amendment No. 1

BS 476-15 1993 Fire tests on building materials and structures

ISO 5660-1 1993 Part 15: Method for measuring the rate of heat release of products

BS 476-20 1987 Fire tests on building materials and structures

Part 20: Method for determination of the fire resistance of elements of construction (general principles)

Incorporating Amendment No. 1

BS 476-21 1987 Fire tests on building materials and structures

Part 21: Method for determination of the fire resistance of loadbearing elements of construction

BS 476-22 1987 Fire tests on building materials and structures

Part 22: Method for determination of the fire resistance of the fire resistance of non-loadbearing elements of construction

BS 476-23 1987 Fire tests on building materials and structures

Part 23: Method for determination of the fire resistance of the contribution of components to the fire resistance of a structure

Incorporating Amendment No. 1

BS 476-24 1987 Fire tests on building materials and structures

ISO 6944-1985 Part 24: Method for determination of the fire resistance of ventilation ducts

(ISO title: Fire resistance tests – Ventilation ducts)

BS 476-3 1975 Fire tests on building materials and structures

Part 3: External fire exposure roof test

BS 476-31.1 1983 Fire tests on building materials and structures

Part 31: Method for measuring smoke penetration through doorsets and shutter assemblies

Part 31.1: Method for measurement under ambient temperature conditions

Incorporating Amendment No. 1

BS 476-32 1989 Fire tests on building materials and structures

Part 32: Guide to full scale fire tests within buildings

BS 476-33 1993 Fire tests on building materials and structures

ISO 9705 1993 Part 33: Full-scale room test for surface products

BS 476-4 1970 Fire tests on building materials and structures

Part 4: Non-combustibility test for materials

Incorporating amendments issued:

March 1978 – AMD 2483

September 1983 – AMD 4390

(Confirmed January 1984)

BS 476-6 1989 Fire tests on building materials and structures

Part 6: Method of test for fire propagation for products

BS 476-7 1997 Fire tests on building materials and structures

Part 7: Method of test to determine the classification of the surface spread of flame of products

BS 500 2000 Steel sleepers

BS 534 1990 Specification for

Steel pipes, joints and specials for water and sewage

BS 594-1 1992 Hot rolled asphalt for roads and other paved areas

Part 1: Specification for constituent materials and asphalt mixtures

Incorporating Amendment No. 1

BS 594-2 1992 Hot rolled asphalt for roads and other paved areas

Part 2: Specification for the transport, laying and compaction of rolled asphalt

Incorporating Amendment Nos. 1 and 2

BS 709 1983 Methods of

Destructive testing fusion welded joints weld metal in steel

Incorporating Amendment Nos. 1, 2 and 3

BS 812-100 1990 Testing aggregates

Part 100: General requirements for apparatus and calibration

Incorporating Amendment No. 1

BS 812-101 1984 Testing aggregates —

Part 101: Guide to sampling and testing aggregates

BS 812-102 1989 Testing aggregates

Part 102: Methods for sampling

BS 812-103.1 1985 Testing aggregates —

Part 103: Methods for determination of particle size distribution

Section 103.1 Sieve tests

Incorporating Amendment No. 1

BS 812-103.2 1989 Testing aggregates —

Part 103: Methods for determination of particle size distribution

Section 103.2 Sedimentation test

BS 812-104 1994 Testing aggregates —

Part 104: Method for qualitative and quantitative petrographic examination of aggregates

BS 812-105.1 1989 Testing aggregates —

Part 105: Methods for determination of particle shape —

Section 105.1 Flakiness index

BS 812-105.2 1990 Testing aggregates —

Part 105: Methods for determination of particle shape —

Section 105.2 Elongation index of coarse aggregate

BS 812-106 1985 Testing aggregates —

Part 106: Method for determination of shell content in coarse aggregate

BS 812-109 1990 Testing aggregates —

Part 109: Methods for determination of moisture content

BS 812-110 1990 Testing aggregates —

Part 110: Methods for determination of aggregate crushing value (ACV)

BS 812-111 1990 Testing aggregates —

Part 111: Methods for determination of ten per cent fines value (TFV)

BS 812-112 1990 Testing aggregates —

Part 112: Methods for determination of aggregate impact value (AIV)

BS 812-113 1990 Testing aggregates —

Part 113: Method for determination of aggregate abrasion value (AAV)

Incorporating Amendment Nos. 1 and 2

BS 812-114 1989 Testing aggregates —

Part 114: Method for determination of the polished-stone value

BS 812-117 1988 Testing aggregates —

Part 117: Method for determination of water-soluble chloride salts

BS 812-118 1988 Testing aggregates —

Part 118: Methods for determination of sulphate content

BS 812-119 1985 Testing aggregates —

Part 119: Method for determination of acid-soluble material in fine aggregate

BS 812-120 1989 Testing aggregates —

Part 120: Method for testing and classifying drying shrinkage of aggregates in concrete

BS 812-121 1989 Testing aggregates —

Part 121: Method for determination of soundness

BS 812-123 1999 Testing aggregates —

Part 123: Method for determination of alkali-silica reactivity – Concrete prism method

BS 812-124 1989 Testing aggregates —

Part 124: Method for determination of frost-heave

BS 812-2 1995 Testing aggregates —

Part 2. Methods of determination of density

Incorporating Amendment Nos. 1 and 2

BS 882 1992 Specification for

Aggregates from natural sources for concrete

BS 890 1995 Specification for

Building limes

BS 915-2 1972 Specification for

High alumina cement

Part 2: Metric units

Incorporating Amendment Nos. 1, 2, 3 and 4

BS 1014 1975 Specification for

Pigments for Portland cement and Portland cement products

Confirmed December 1986

BS 1042-1.4 1992 Measurement of fluid flow in closed conduits —

Part 1: Pressure differential devices — Section 1.4 Guide to the use of devices specified in Sections 1.1 and 1.2

Incorporating Amendment No. 1

BS 1042-2.1 1983 Measurement of fluid flow in closed conduits —

ISO 3966 1977 Part 2: Velocity area methods

Section 2.1: Method using Pitot static tubes

Confirmed March 1998

BS 1042-2.2 1983 Measurement of fluid flow in closed conduits —

ISO 7145 1982 Part 2: Velocity area methods

Section 2.2: Method of measurement of velocity at one point of a conduit of circular cross section

[ISO title: Determination of flowrate of fluids in closed conduits of circular cross-section — Method of velocity measurement at one point of the cross-section]

Confirmed March 1998

BS 1042-2.3 1984 Measurement of fluid flow in closed conduits —

ISO 7194 1983 Part 2: Velocity area methods

Section 2.3 Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes

[ISO title: Measurement of fluid flow in closed conduits — Velocity area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes]

BS 1042-2.4 1989 Measurement of fluid flow in closed conduits —

ISO 3354 1988 Part 2: Velocity area methods

Section 2.4: Method of measurement of clear water flow using current meters in full conduits and under regular flow conditions

BS 1047 1983 Specification for

Air-cooled blastfurnace slag aggregate for use in construction

BS 1186-2 1988 Timber for and workmanship in joinery

Part 2: Specification for workmanship

Incorporating Amendment No.1

BS 1186-3 1990 Timber for and workmanship in joinery

Part 3: Specification for wood trim and its fixing

Incorporating Amendment No.1

BS 1199 1976 Specification for

Building sands from natural sources

Incorporating Amendment Nos.1, 2 and 3

BS 1203 1979 Specification for

Synthetic resin adhesives (phenolic and aminoplastic) for plywood

BS 1204 1993 Specification for

Type MR phenolic and aminoplastic synthetic resin adhesives for wood

BS 1370 1979 Specification for

Low heat Portland cement

Incorporating Amendment No.1

BS 1377-1 1990 Methods of test for

Soils for civil engineering purposes

Part 1: General requirements and sample preparation

Incorporating Amendment No.1

BS 1377-2 1990 Methods of test for

Soils for civil engineering purposes

Part 2: Classification tests

Incorporating Amendment No.1

BS 1377-3 1990 Methods of test for

Soils for civil engineering purposes

Part 3: Chemical and electro-chemical tests

Incorporating Amendment No.1

BS 1377-4 1990 Methods of test for

Soils for civil engineering purposes

Part 4: Compaction-related tests

Incorporating Amendment No.1

BS 1377-5 1990 Methods of test for

Soils for civil engineering purposes

Part 5: Compressibility, permeability and durability tests

Incorporating Amendment No.1

BS 1377-6 1990 Methods of test for

Soils for civil engineering purposes

Part 6: Consolidation and permeability tests in hydraulic cells and with pore pressure measurement

Incorporating Amendment No.1

BS 1377-7 1990 Methods of test for

Soils for civil engineering purposes

Part 7: Shear strength tests (total stress)

Incorporating Amendment No.1

BS 1377-8 1990 Methods of test for

Soils for civil engineering purposes

Part 8: Shear strength tests (effective stress)

Incorporating Amendment No.1

BS 1377-9 1990 Methods of test for

Soils for civil engineering purposes

Part 9: In-situ tests

Incorporating Amendment No.1

BS 1446 1973 Specification for

Mastic asphalt (natural rock asphalt fine aggregate) for roads and footways

BS1881-101 1983 Testing concrete

Part 101: Method of sampling fresh concrete on site

Reprinted, incorporating Amendment No.1 and No.2

BS1881-102 1983 Testing concrete

Part 102: Method for determination of slump

Incorporating Amendment Nos.1 and 2

BS1881-103 1993 Testing concrete

Part 103: Method for determination of compacting factor

BS1881-104 1983 Testing concrete

Part 104: Method for determination of Vebe time

Incorporating Amendment Nos.1 and 2

BS1881-105 1984 Testing concrete

Part 105: Methods for determination of flow

Reprinted, incorporating Amendment No.1 and No.2

BS1881-106 1983 Testing concrete

Part 106: Methods for determination of air content of fresh concrete

Incorporating Amendment Nos.1 and 2

BS1881-107 1983 Testing concrete

Part 107: Method for determination of density of compacted fresh concrete

Reprinted, incorporating Amendment No.1 and No.2

BS1881-108 1983 Testing concrete

Part 108: Method for making test cubes from fresh concrete

Incorporating Amendment No.1 and implementing Amendment No.2 not published separately

BS1881-109 1983 Testing concrete

Part 109: Method for making test beams from fresh concrete

Incorporating Amendment No.1

BS1881-110 1983 Testing concrete

Part 110: Method for making test cylinders from fresh concrete

Reprinted, incorporating Amendment No.1

BS1881-111 1983 Testing concrete

Part 111: Method of normal curing of test specimens (20°C method)

Incorporating Amendment No.1 and implementing Amendment No.2 not published separately

BS1881-112 1983 Testing concrete

Part 112: Methods of accelerated curing of test cubes

Reprinted, incorporating Amendment No.1

BS1881-113 1983 Testing concrete

Part 113: Method for making and curing no-fines test cubes

Incorporating Amendment No.1

BS1881-114 1983 Testing concrete

Part 114: Methods for determination of density of hardened concrete

Reprinted, incorporating Amendment No.1 and No.2

BS1881-115 1986 Testing concrete

Part 115: Specification for compression testing machines for concrete

Reprinted, incorporating Amendment No.1

BS1881-116 1983 Testing concrete

Part 116: Method for determination of compressive strength of concrete cubes

Reprinted, incorporating Amendment No.1 and No.2

BS1881-117 1983 Testing concrete

Part 117: Method for determination of tensile splitting strength

Incorporating Amendment No.1

BS1881-118 1983 Testing concrete

Part 118: Method for determination of flexural strength

Incorporating Amendment No.1

BS1881-119 1983 Testing concrete

Part 119: Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)

BS1881-121 1983 Testing concrete

Part 121: Method for determination of static modulus of elasticity in compression

BS1881-122 1983 Testing concrete

Part 122: Method for determination of water absorption

Incorporating Amendment No.1

BS1881-124 1988 Testing concrete

Part 124: Methods for analysis of hardened concrete

BS1881-125 1986 Testing concrete

Part 125: Methods for mixing and sampling fresh concrete in the laboratory

Reprinted, incorporating Amendment No.1

BS1881-127 1990 Testing concrete

Part 127: Method of verifying the performance of a concrete cube compression machine using the comparative cube test

BS1881-128 1997 Testing concrete

Part 128. Methods for analysis of fresh concrete

BS1881-129 1992 Testing concrete

Part 129: Method for determination of density of partially compacted semi-dry fresh concrete

BS1881-130 1996 Testing concrete

Part 130. Method for temperature-matched curing of concrete specimens

BS1881-131 1998 Testing concrete

Part 131. Methods for testing cement in a reference concrete

Incorporating Amendment No.1

BS1881-201 1986 Testing concrete

Part 201: Guide to the use of non-destructive methods of test for hardened concrete

BS1881-202 1986 Testing concrete

Part 202: Recommendations for surface hardness testing by rebound hammer

BS1881-203 1986 Testing concrete

Part 203: Recommendations for measurement of velocity of ultrasonic pulses in concrete

Incorporating Amendment Nos.1 and 2

BS1881-204 1988 Testing concrete

Part 204: Recommendations on the use of electromagnetic covermeters

Incorporating Amendment No.1

BS1881-206 1986 Testing concrete

Part 206: Recommendations for determination of strain in concrete

BS1881-207 1992 Testing concrete

Part 207: Recommendations for the assessment of concrete strength by near-to-surface tests

BS1881-208 1996 Testing concrete

Part 208: Recommendations for the determination of the initial surface absorption of concrete

BS1881-209 1990 Testing concrete

Part 209: Recommendations for the measurement of dynamic modulus of elasticity

BS1881-5 1970 Testing concrete

Part 5: Methods of testing hardened concrete for other than strength

Incorporating Amendment Nos.1 and 2

BS 1924-1 1990 Stabilized materials for civil engineering purposes

Part 1: General requirements, sampling, sample preparation and tests on materials before stabilization

BS 1924-2 1980 Stabilized materials for civil engineering purposes

Part 2: Methods of test for cement-stabilized and lime-stabilized materials

BS 2573-1 1983 Rules for the design of cranes

Part 1: Specification for classification, stress calculations and design criteria for structures

BS 2573-2 1980 Rules for the design of cranes

Part 2: Specification for classification, stress calculations and design of mechanisms

Reprinted, incorporating Amendment No.1 and No.2 inclusive

BS 2654 1989 Specification for

Manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry

BS 2655-1 1970 Specification for

Lifts, escalators, passenger conveyors and paternosters

Part 1: General requirements for electric, hydraulic and hand-powered lifts

Incorporating Amendment Nos.1, 2, 3, 4, 5 and 6

BS 2655-10 1971 Specification for

Lifts, escalators, passenger conveyors and paternosters

Part 10: General requirements for guarding

Incorporating Amendment Nos.1, 2 and 3

BS 2655-4 1969 Specification for

Lifts, escalators, passenger conveyors and paternosters

Part 4: General requirements for escalators and passenger conveyors

Incorporating Amendment Nos.1, 2 and 3

BS 2655-5 1970 Specification for

Lifts, escalators, passenger conveyors and paternosters

Part 5: General requirements for paternosters

Incorporating Amendment No.1

BS 2655-6 1970 Specification for

Lifts, escalators, passenger conveyors and paternosters

Part 6: Building construction requirements

Incorporating Amendment Nos.1, 2, 3, 4 and 5

BS 2655-7 1970 Specification for

Lifts, escalators, passenger conveyors and paternosters

Part 7: Testing and inspection

Incorporating Amendment Nos.1 and 2

BS 2655-8 1971 Specification for

Lifts, escalators, passenger conveyors and paternosters

Part 8: Modernization or reconstruction of lifts, escalators and paternosters

Incorporating Amendment Nos.1 and 2

BS 2655-9 1970 Specification for

Lifts, escalators, passenger conveyors and paternosters

Part 9: Definitions

Incorporating Amendment Nos.1 and 2

BS 2853 1957 Specification

The design and testing of steel overhead runway beams

Incorporating Amendment Nos.1, 2, 3 and 4

BS 2965-2 1965 Specification for

Sprayed metal coatings

Part 2: Protection of iron and steel against corrosion and oxidation at elevated temperatures

BS 3148 1980 Methods of test for

Water for making concrete (including notes on the suitability of the water)

BS 3416 1991 Specification for

Bitumen-based coatings for cold application, suitable for use in contact with potable water

Reprinted, incorporating Amendment No.1

BS 3572 1986 Specification for

Access fittings for chimneys and other high structures in concrete or brickwork

Incorporating Amendment No.1

BS 3692 1967 Specification for

ISO metric precision hexagon bolts screws and nuts

Incorporating Amendment No.2

BS 3712-1 1991 Building and construction sealants

Part 1: Methods of test for homogeneity, relative density and penetration

BS 3712-2 1973 Building and construction sealants

Part 2: Methods of test for seepage, staining, shrinkage, shelf life and paintability

Incorporating Amendment Nos.1 and 2

BS 3712-3 1974 Building and construction sealants

Part 3: Methods of test for application life, skinning properties and tack-free time

Incorporating Amendment Nos.1 and 2

BS 3712-4 1994 Building and construction sealants

Part 4: Method of test for adhesion in peel

BS 3892-1 1997 Pulverized-fuel ash

Part 1. Specification for pulverized-fuel ash for use with Portland cement

BS 3892-2 1978 Pulverized-fuel ash

Part 2. Specification for pulverized-fuel ash to be used as a Type I addition

BS 3892-3 1997 Pulverized-fuel ash

Part 3. Specification for pulverized-fuel ash for use in cementitious grouts

BS 3921 1985 Specification for

Clay bricks

Incorporating Amendment No.1

BS 3974-1 1974 Specification for

Pipe supports

Part 1: Pipe hangers, slider and roller type supports

Incorporating Amendment No.1

BS 3974-2 1978 Specification for

Pipe supports

Part 2: Pipe clamps, cages, cantilevers and attachments to beams

Incorporating Amendment No.1

BS 3974-3 1980 Specification for

Pipe supports

Part 3: Large bore, high temperature, marine and other applications

Incorporating Amendment No.1

BS 4027 1996 Specification for

Sulfate-resisting Portland cement

BS 4066 2000 Construction drawings –

Bar scheduling

BS 4074 1982 Specification for

Metal props and struts

Incorporating Amendment No.1

Confirmed June 1991

BS 4074 2000 Specification for

Steel trench struts

BS 4147 1980 Specification for

Bitumen-based hot-applied coating materials for protecting iron and steel, including suitable primers where required

Reprinted, incorporating Amendment No.1

Confirmed August 1987

BS 4164 1987 Specification for

Coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer

Incorporating Amendment Nos.1 and 2

BS 4190 1967 Specification for

ISO metric black hexagon bolts, screws and nuts

Incorporating Amendment Nos.1, 2 and 3

BS 4211 1994 Specification for

Ladders for permanent access to chimneys, other high structures, silos and bins

BS 4254 1983 Specification for

Two-part polysulphide-based sealants

BS 4261 1999 Wood preservation –

Vocabulary

BS 4320 1968 Specification for

Metal washers for general engineering purposes metric series

Confirmed April 1998

BS 4395-1 1969 Specification for

High strength friction grip bolts and associated nuts and washers for structural engineering metric series

Part 1: General Grade

Incorporating Amendment Nos.1 and 2

BS 4395-2 1969 Specification for

High strength friction grip bolts and associated nuts and washers for structural engineering metric series

Part 2: Higher grade bolts and nuts and general grade washers

Incorporating amendments issued October 1975 (AMD 1842) and December 1976 (AMD 2186)

BS 4447 1973 Specification for

The performance of prestressing anchorages for post-tensioned construction

Incorporating Amendment No.1

Confirmed December 1990

BS 4449 1997 Specification for

Carbon steel bars for the reinforcement of concrete

BS 4482 1985 Specification for

Cold reduced steel wire for the reinforcement of concrete

Incorporating Amendment No.1

BS 4483 1998 Steel fabric for the reinforcement of concrete

BS 4485-1 1969 Specification for

Water cooling towers

Part 1: Glossary of terms

BS 4485-2 1988 Specification for

Water cooling towers

Part 2: Method for performance testing

BS 4485-3 1988 Specification for

Water cooling towers

Part 3: Code of practice for thermal and functional design

BS 4485-4 1996 Specification for

Water cooling towers

Part 4: Code of practice for structural design and construction

BS 4486 1980 Specification for

Hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete

Incorporating Amendment No.1

BS 4592-1 1995 Industrial type metal flooring, walkways and stair treads

Part 1: Specification for open bar gratings

Incorporating Amendment No.1

BS 4604-1 1970 Specification for

The use of high strength friction grip bolts in structural steelwork metric series

Part 1: General grade

Incorporating amendments issued

January, 1971 (AMD 679)

December, 1972 (AMD 1039) and

September, 1982 (AMD 4052)

BS 4604-2 1970 Specification for

The use of high strength friction grip bolts in structural steelwork metric series

Part 2: Higher grade (parallel shank)

Incorporating Amendment Nos.1 and 2

BS 4618-0 1970 Recommendations for

The presentation of plastics design data

General Introduction

BS 4620 1970 Specification for

Rivets

For general engineering purposes

BS 4933 1973 Specification for

ISO metric black cup and countersunk head bolts and screws with hexagon nuts

BS 4978 1996 Specification for

Visual strength grading of softwood

BS 5075-1 1982 Concrete admixtures

Part 1: Specification for accelerating and retarding water-reducing admixtures

Incorporating Amendment Nos. 1, 2 and 3

BS 5075-2 1982 Concrete admixtures

Part 2: Specification for air-entraining admixtures

Reprinted, incorporating Amendments No.1 and No. 2

BS 5075-3 1985 Concrete admixtures

Part 3: Specification for superplasticizing admixtures

Incorporating Amendment No.1

BS 5135 1984 Specification for

Arc welding of carbon and carbon manganese steels

Reprinted, incorporating Amendment No.1

BS 5215 1986 Specification for

One-part gun grade polysulphide-based sealants

Incorporating Amendment No.1

BS 5228-1 1997 Noise and vibration control on construction and open sites

Part 1. Code of practice for basic information and procedures for noise and vibration control

Incorporating Amendment No.1

BS 5228-2 1997 Noise and vibration control on construction and open sites

Part 2. Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance

BS 5228-4 1992 Noise and vibration control on construction and open sites

Part 4: Code of practice for noise and vibration control applicable to piling operations

Incorporating Amendment No.1

BS 5250 1989 Code of practice for

Control of condensation in buildings

BS 5268-2 1996 Structural use of timber

Part 2: Code of practice for permissible stress design, materials and workmanship

Incorporating Amendment No.1

BS 5268-3 1998 Structural use of timber

Part 3: Code of practice for trussed rafter roofs

BS 5268-4.1 1978 Structural use of timber

Part 4: Fire resistance of timber structures

Section 4.1: Recommendations for calculating fire resistance of timber members

Incorporating Amendments No.1 and No. 2

BS 5268-4.2 1990 Structural use of timber

Part 4: Fire resistance of timber structures

Section 4.2: Recommendations for calculating fire resistance of timber stud walls and joisted floor constructions

BS 5268-5 1989 Structural use of timber

Part 5: Code of practice for the preservative treatment of structural timber

BS 5268-6.1 1996 Structural use of timber

Part 6: Code of practice for timber frame walls

Section 6.1 Dwellings not exceeding four storeys

Incorporating Amendment No.1

BS 5268-7.1 1989 Structural use of timber

Part 7: Recommendations for the calculation basis for span tables

Section 7.1 Domestic floor joists

BS 5268-7.2 1989 Structural use of timber

Part 7: Recommendations for the calculation basis for span tables

Section 7.2 Joists for flat roofs

BS 5268-7.3 1989 Structural use of timber

Part 7: Recommendations for the calculation basis for span tables

Section 7.3: Ceiling joists

BS 5268-7.4 1989 Structural use of timber

Part 7: Recommendations for the calculation basis for span tables

Section 7.4 Ceiling binders

BS 5268-7.5 1990 Structural use of timber

Part 7: Recommendations for the calculation basis for span tables

Section 7.5 Domestic rafters

BS 5268-7.6 1990 Structural use of timber

Part 7: Recommendations for the calculation basis for span tables

Section 7.6 Purlins supporting rafters

Incorporating Amendment No.1

BS 5268-7.7 1990 Structural use of timber

Part 7: Recommendations for the calculation basis for span tables

Section 7.7 Purlins supporting sheeting or decking

BS 5328-1 1997 Concrete

Part 1. Guide to specifying concrete

Incorporating Amendment No.1

BS 5328-2 1997 Concrete

Part 2. Methods for specifying concrete mixes

Incorporating Amendments Nos. 1 and 2 and Corrigendum 1 not issued separately

BS 5328-3 1990 Concrete

Part 3. Specification for the procedures to be used in producing and transporting concrete

Incorporating Amendments Nos. 1, 2 and 4 and Corrigendum No. 1.

Amendment No.3 was implemented and not published separately

BS 5328-4 1990 Concrete

Part 4. Specification for the procedures to be used in sampling, testing and assessing compliance of concrete

Incorporating Amendments Nos. 1, 2 and 4 and Corrigendum No. 1 not issued separately and implementing Amendment No.3 not published separately

BS 5395-1 1977 Stairs, ladders and walkways

Part 1: Code of practice for the design of straight stairs

Confirmed November 1984

BS 5395-1 2000 Stairs, ladders and walkways

Part 1: Code of practice for the design, construction and maintenance of straight stairs and winders

BS 5395-2 1984 Stairs, ladders and walkways

Part 2: Code of practice for the design of helical and spiral stairs

Reprinted, incorporating Amendment No.1

BS 5395-3 1985 Stairs, ladders and walkways

Part 3: Code of practice for the design of industrial type stairs, permanent ladders and walkways

BS 5400-1 1988 Steel, concrete and composite bridges

Part 1: General statement

BS 5400-2 1978 Steel, concrete and composite bridges

Part 2: Specification for loads

Incorporating Amendment No.1

BS 5400-3 1982 Steel, concrete and composite bridges

Part 3: Code of practice for design of steel bridges

Reprinted, incorporating Amendments No.1 and No. 2

BS 5400-4 1990 Steel, concrete and composite bridges

Part 4: Code of practice for design of concrete bridges

BS 5400-5 1979 Steel, concrete and composite bridges

Part 5: Code of practice for design of composite bridges

Reprinted, incorporating Amendment No.1

BS 5400-6 1999 Steel, concrete and composite bridges

Part 6. Specification for materials and workmanship, steel

BS 5400-7 1978 Steel, concrete and composite bridges

Part 7: Specification for materials and workmanship, concrete, reinforcement and prestressing tendons

BS 5400-8 1978 Steel, concrete and composite bridges —

Part 8: Recommendations for materials and workmanship, concrete, reinforcement and prestressing tendons

BS 5400-9.1 1983 Steel, concrete and composite bridges

Part 9: Bridge bearings

Section 9.1 Code of practice for design of bridge bearings

BS 5400-9.2 1983 Steel, concrete and composite bridges

Part 9: Bridge bearings

Section 9.2 Specification for materials, manufacture and installation of bridge bearings

BS 5489-1 1992 Road lighting

Part 1: Guide to the general principles

Incorporating Amendment No.1

BS 5489-10 1992 Road lighting

Part 10: Code of practice for lighting for motorways

Incorporating Amendment No.1

BS 5489-2 1992 Road lighting

Part 2: Code of practice for lighting for traffic routes

BS 5489-3 1992 Road lighting

Part 3. Code of practice for lighting for subsidiary roads and associated pedestrian areas

Incorporating Amendments No.1 and No.2

BS 5489-4 1992 Road lighting

Part 4: Code of practice for lighting for single-level road junctions including roundabouts

Incorporating Amendment No.1

BS 5489-5 1992 Road lighting

Part 5: Code of practice for lighting for grade-separated junctions

BS 5489-6 1992 Road lighting

Part 6: Code of practice for lighting for bridges and elevated roads

BS 5489-7 1992 Road lighting

Part 7: Code of practice for the lighting of tunnels and underpasses

Incorporating Amendment No.1

BS 5489-8 1998 Road lighting

Part 8: Code of practice for lighting that may affect the safe use of aerodromes, railways, harbours and navigable inland waterways

BS 5489-9 1996 Road lighting

Part 9: Code of practice for lighting for urban centres and public amenity areas

BS 5493 1977 Code of practice for

Protective coating of iron and steel structures against corrosion

Incorporated by Amendment No.2

BS 5502-74 1991 Buildings and structures for agriculture

Part 74: Code of practice for design and construction of bins and silos for combinable crops

BS 5507-1 1977 Methods of test for

Falsework equipment

Part 1: Floor centres

Incorporating Amendment No.1

BS 5507-3 1982 Methods of test for

Falsework equipment

Part 3: Props

BS 5531 1988 Code of practice for

Safety in erecting structural frames

BS 5589 1989 Code of practice for

Preservation of timber

BS 5606 1990 Guide to

Accuracy in building

Incorporating Amendment No.1

Confirmed May 1998

BS 5607 1998 Code of practice for

The safe use of explosives in the construction industry

BS 5628-1 1992 Code of practice for

Use of masonry

Part 1: Structural use of unreinforced masonry

Incorporating Amendment No.1

BS 5628-2 1995 Code of practice for

Use of masonry

Part 2: Structural use of reinforced and prestressed masonry

BS 5628-2 2000 Code of practice for

Use of masonry

Part 2: Structural use of reinforced and prestressed masonry

BS 5628-3 1985 Code of practice for

Use of masonry

Part 3: Materials and components, design and workmanship — (formerly CP 121-1)

Reprinted, incorporating Amendment No.1

BS 5896 1980 Specification for

High tensile steel wire and strand for the prestressing of concrete

BS5911-100 1988 Precast concrete pipes, fittings and ancillary products

Part 100: Specification for unreinforced and reinforced pipes and fittings with flexible joints

Reprinted, incorporating Amendment Nos.1 and 2

BS5911-103 1994 Precast concrete pipes, fittings and ancillary products

Part 103: Specification for prestressed non-pressure pipes and fittings with flexible joints

BS 5911-110 1992 Precast concrete pipes, fittings and ancillary products

Part 110: Specification for ogee pipes and fittings (including perforated)

Incorporating Amendment No.1

BS 5911-114 1992 Precast concrete pipes, fittings and ancillary products

Part 114: Specification for porous pipes

BS 5911-120 1989 Precast concrete pipes, fittings and ancillary products

Part 120: Specification for reinforced jacking pipes with flexible joints

Incorporating Amendment No.1

BS 5911-2 1982 Precast concrete pipes, fittings and ancillary products

Part 2: Specification for inspection chambers

Reprinted, incorporating Amendment Nos.1 and 2

BS 5911-200 1989 Precast concrete pipes, fittings and ancillary products

Part 200. Specification for unreinforced and reinforced manholes and soakaways of circular cross section

BS 5930 1981 Code of practice for

Site investigations

(Formerly CP 2001)

BS 5930 1999 Code of practice for site investigations

BS 5950-1 1990 Structural use of steelwork in building

Part 1: Code of practice for design in simple and continuous construction: hot rolled sections

BS 5950-2 1992 Structural use of steelwork in building

Part 2: Specification for materials, fabrication and erection: hot rolled sections

Incorporating Amendment No.1

BS 5950-3.1 1990 Structural use of steelwork in building

Part 3: Design in composite construction

Section 3.1 Code of practice for design of simple and continuous composite beams

BS 5950-4 1994 Structural use of steelwork in building

Part 4: Code of practice for design of composite slabs with profiled steel sheeting

BS 5950-5 1998 Structural use of steelwork in building

Part 5. Code of practice for design of cold formed thin gauge sections

BS 5950-6 1995 Structural use of steelwork in building

Part 6. Code of practice for design of light gauge profiled steel sheeting

Implementing Amendment No. 1 not published separately and incorporating Corrigendum No. 1

BS 5950-7 1992 Structural use of steelwork in building

Part 7: Specification for materials and workmanship: cold formed sections

BS 5950-8 1990 Structural use of steelwork in building

Part 8: Code of practice for fire resistant design

Incorporating Amendment No.1

BS 5950-9 1994 Structural use of steelwork in building

Part 9: Code of practice for stressed skin design

Incorporating Amendment Nos.1 and 2

BS 5974 1990 Code of practice for

Temporarily installed suspended scaffolds and access equipment

Incorporating Amendment No.1

BS 5975 1996 Code of practice for

Falsework

Incorporating Amendment No.1

BS 6031 1981 Code of practice for

Earthworks

Reprinted, incorporating Amendment No.1

BS 6073-1 1981 Precast concrete masonry units

Part 1: Specification for precast concrete masonry units

Incorporating Amendment Nos.1 and 2

BS 6073-2 1981 Precast concrete masonry units

Part 2: Method for specifying precast concrete masonry units

Incorporating Amendment No.1

BS 6079-1 2000 Project management

Part 1: Guide to project management

Incorporating Amendment Nos.1 and 2 to BS 6079:1996 (amendment no. 2 renumbers the BS as BS 6079-1:2000)

BS 6079-2 2000 Project management

Part 2: Vocabulary

Incorporating Corrigendum No.1

BS 6079-3 2000 Project management

Part 3: Guide to the management of business related project risk

BS 6089 1981 Guide to

Assessment of concrete strength in existing structures

BS 6093 1993 Code of practice for

Design of joints and jointing in building construction

BS 6100 221 1992 Glossary of

Building and civil engineering terms

Part 2. Civil engineering

Section 2.2 Substructures. Earthworks. Foundations. Tunnels

Subsection 2.2.1 Earthworks

Implementing Amendment No. 1 not published separately

BS 6100 222 1999 Glossary of

Building and civil engineering terms

Part 2. Civil engineering

Section 2.2 Substructures. Earthworks. Foundations. Tunnels

Subsection 2.2.2: Substructures and foundations

BS 6100 223 1990 Glossary of

Building and civil engineering terms

Part 2. Civil engineering

Section 2.2 Substructures. Earthworks. Foundations. Tunnels

Subsection 2.2.3 Tunnels

BS 6164 1990 Code of practice for

Safety in tunnelling in the construction industry

BS 6187 2000 Code of practice for

Demolition

BS 6213 1982 Guide to

Selection of constructional sealants

BS 6213 2000 Selection of construction sealants –

Guide

BS 6346 1997 Specification for

600/1000 V and 1900/3300 V armoured electric cables having PVC insulation

BS 6349-1 1984 Code of practice for

Maritime structures

Part 1: General criteria

Incorporating Amendments No.1 to No. 5 inclusive

BS 6349-1 2000 Maritime structures

Part 1: Code of practice for general criteria

BS 6349-2 1988 Code of practice for

Maritime structures

Part 2: Design of quay walls, jetties and dolphins

BS 6349-3 1988 Code of practice for

Maritime structures

Part 3: Design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates

BS 6349-4 1994 Code of practice for

Maritime structures

Part 4: Code of practice for design of fendering and mooring systems

BS 6349-5 1991 Code of practice for

Maritime structures

Part 5: Code of practice for dredging and land reclamation

BS 6349-6 1989 Code of practice for

Maritime structures

Part 6: Design of inshore moorings and floating structures

BS 6349-7 1991 Code of practice for

Maritime structures

Part 7: Guide to the design and construction of breakwaters

BS 6367 1983 Code of practice for

Drainage of roofs and paved areas

(Formerly CP 308)

BS 6399-1 1996 Loading for buildings

Part 1. Code of practice for dead and imposed loads

BS 6399-2 1997 Loading for buildings

Part 2: Code of practice for wind loads

BS 6399-3 1988 Loading for buildings

Part 3: Code of practice for imposed roof loads

Incorporating Amendment Nos.1 and 3 and Implementing Amendment No. 2

BS 6579-1 1988 Safety fences and barriers for highways

Part 1: Specification for components for tensioned corrugated beam safety fence on Z posts

Reprinted, incorporating Amendment No.1

BS 6579-3 1988 Safety fences and barriers for highways

Part 3: Specification for components for tensioned rectangular hollow section beam (100 mm × 100 mm) safety fence

BS 6579-4 1990 Safety fences and barriers for highways

Part 4: Specification for components for tensioned rectangular hollow section beam (200 mm× 100 mm) safety fence

BS 6579-5 1986 Safety fences and barriers for highways

Part 5: Specification for open box beam safety fence (single height)

BS 6579-6 1988 Safety fences and barriers for highways

Part 6: Specification for components for open box beam safety fence (double height)

BS 6579-7 1989 Safety fences and barriers for highways

Part 7: Specification for components for untensioned corrugated beam safety fence

BS 6579-8 1987 Safety fences and barriers for highways

Part 8: Specification for concrete safety barriers

BS 6588 1996 Specification for

Portland pulverized-fuel ash cements

BS 6610 1996 Specification for

Pozzolanic pulverized-fuel ash cement

BS 6626 1985 Code of practice for

Maintenance of electrical switchgear and controlgear for voltages above 1 kV and up to and including 36 kV

Reprinted, incorporating Amendments Nos.1 and 2

Confirmed January 1993

BS 6651 1999 Code of practice for

Protection of structures against lightning

Incorporating Corrigendum No.1

BS 6677-1 1986 Clay and calcium silicate pavers for flexible pavements

Part 1: Specification for pavers

BS 6677-2 1986 Clay and calcium silicate pavers for flexible pavements

Part 2: Code of practice for design of lightly trafficked pavements

BS 6699 1992 Specification for

Ground granulated blastfurnace slag for use with Portland cement

BS 6717-1 1993 Precast concrete paving blocks

Part 1: Specification for paving blocks

BS 6744 1986 Specification for

Austenitic stainless steel bars for the reinforcement of concrete

BS 6779-1 1998 Highway parapets for bridges and other structures

Part 1. Specification for vehicle containment parapets of metal construction

BS 6779-2 1991 Highway parapets for bridges and other structures

Part 2: Specification for vehicle containment parapets of concrete construction

BS 6779-3 1994 Highway parapets for bridges and other structures

Part 3: Specification for vehicle containment parapets of combined metal and concrete construction

BS 6779-4 1999 Highway parapets for bridges and other structures

Part 4: Specification for parapets of reinforced and unreinforced masonry construction

BS 6861-1 1987 Balance quality requirements of rigid rotors

Part 1: Method for determination of permissible residual unbalance —

[ISO title: Mechanical vibration —

Balance quality requirements of rigid rotors — Part 1: Determination of permissible residual unbalance]

Reprinted, incorporating Amendment No.1

BS 6861-2 1997 Mechanical vibration

ISO 1940-2 1997 Balance quality requirements of rigid rotors

Part 2: Balance errors

BS 6925 1988 Specification for

Mastic asphalt for building and civil engineering (limestone aggregate)

Incorporating Amendments Nos.1 and 2

BS 6954-1 1988 Tolerances for building —

ISO 3443/1 1979 Part 1: Recommendations for basic principles for evaluation and specification

BS 6954-2 1988 Tolerances for building —

ISO 3443-2 1979 Part 2: Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes

BS 6954-3 1988 Tolerances for building —

ISO 3443-3 1987 Part 3: Recommendations for selecting target size and predicting fit

BS 709 1983 Methods of

Destructive testing fusion welded joints weld metal in steel

Incorporating Amendments Nos.1, 2 and 3

BS 7121-1 1989 Code of practice for

Safe use of cranes

Part 1: General

Incorporating Amendment No.1

BS 7121-11 1998 Code of practice for

Safe use of cranes

Part 11: Offshore cranes

BS 7121-12 1999 Code of practice for

Safe use of cranes

Part 12: Recovery vehicles and equipment – Code of practice

BS 7121-2 1991 Code of practice for

Safe use of cranes

Part 2: Inspection, testing and examination

BS 7121-3 2000 Code of practice for

Safe use of cranes

Part 3: Mobile cranes

BS 7121-4 1997 Code of practice for

Safe use of cranes

Part 4. Lorry loaders

BS 7121-5 1997 Code of practice for

Safe use of cranes

Part 5. Tower cranes

BS 7263-1 1994 Precast concrete flags, kerbs, channels, edgings and quadrants

Part 1: Specification

BS 7295-1 1990 Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete

Part 1: Specification for coated bars

Incorporating Amendment No.1

BS 7295-2 1990 Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete

Part 2: Specification for coatings

Incorporating Amendment No.1

BS 7361-1 1991 Cathodic protection

Part 1: Code of practice for land and marine applications

(formerly CP 1021)

BS 7375 1996 Code of practice for

Distribution of electricity on construction and building sites

BS 7419 1991 Specification for

Holding down bolts

BS 7543 1992 Guide to

Durability of buildings and building elements, products and components

Incorporating Amendment No.1

BS 7668 1994 Specification for

Weldable structural steels —

Hot finished structural hollow sections in weather resistant steels

BS 7777-3 1993 Flat-bottomed, vertical, cylindrical storage tanks for low temperature service

Part 3: Recommendations for the design and construction of prestressed and reinforced concrete tanks and tank foundations, and for the design and installation of tank insulation, tank liners and tank coatings

BS 8000-1 1989 Workmanship on building sites

Part 1: Code of practice for excavation and filling

BS 8000-10 1995 Workmanship on building sites

Part 10. Code of practice for plastering and rendering

Incorporating Amendment No.1

BS 8000-11.1 1989 Workmanship on building sites

Part 11: Code of practice for wall and floor tiling

Section 11.1: Ceramic tiles, terrazzo tiles and mosaics

Incorporating Amendment No.1

BS 8000-11.2 1990 Workmanship on building sites

Section 11.2 Natural stone tiles

Incorporating Amendment No.1

BS 8000-12 1989 Workmanship on building sites

Part 12: Code of practice for decorative wallcoverings and painting

BS 8000-13 1989 Workmanship on building sites

Part 13: Code of practice for above ground drainage and sanitary appliances

BS 8000-14 1989 Workmanship on building sites

Part 14: Code of practice for below ground drainage

BS 8000-15 1990 Workmanship on building sites

Part 15: Code of practice for hot and cold water services (domestic scale)

BS 8000-16 1997 Workmanship on building sites

Part 16. Code of practice for sealing joints in buildings using sealants

BS 8000-2.1 1990 Workmanship on building sites

Part 2. Code of practice for concrete work

Section 2.1 Mixing and transporting concrete

Incorporating Amendment No.1, not published separately

BS 8000-2.2 1990 Workmanship on building sites

Part 2. Code of practice for concrete work

Section 2.2 Sitework with in situ and precast concrete

BS 8000-3 1989 Workmanship on building sites

Part 3: Code of practice for masonry

Incorporating Amendment No.1

BS 8000-4 1989 Workmanship on building sites

Part 4: Code of practice for waterproofing

BS 8000-5 1990 Workmanship on building sites

Part 5: Code of practice for carpentry, joinery and general fixings

BS 8000-6 1990 Workmanship on building sites

Part 6: Code of practice for slating and tiling of roofs and claddings

BS 8000-7 1990 Workmanship on building sites

Part 7: Code of practice for glazing

BS 8000-8 1994 Workmanship on building sites

Part 8: Code of practice for plasterboard partitions and dry linings

BS 8000-9 1989 Workmanship on building sites

Part 9: Code of practice for cement/sand floor screeds and concrete floor toppings

BS 8000-9 1999 Workmanship on building sites

Part 9: Cementitious leveling screeds and wearing screeds – Code of practice

BS 8002 1994 Code of practice for

Earth retaining structures

Incorporating Amendment No.1

BS 8004 1986 Code of practice for

Foundations

(Formerly CP 2004)

BS 8005-1 1987 Sewerage

Part 1: Guide to new sewerage construction

This standard is obsolescent

BS 8005-2 1987 Sewerage

Part 2: Guide to pumping stations and pumping mains

BS 8005-3 1989 Sewerage

Part 3: Guide to planning and construction of sewers in tunnel

BS 8005-4 1987 Sewerage

Part 4: Guide to design and construction of outfalls

BS 8005-5 1990 Sewerage

Part 5: Guide to rehabilitation of sewers

BS 8006 1995 Code of practice for

Strengthened/reinforced soils and other fills

Incorporating Amendment No.1

BS 8007 1987 Code of practice for

Design of concrete structures for retaining aqueous liquids

BS 8008 1996 Guide to

Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes

BS 8081 1989 Code of practice for

Ground anchorage

BS 8100-1 1986 Lattice towers and masts

Part 1: Code of practice for loading

BS 8100-2 1986 Lattice towers and masts

Part 2: Guide to the background and use of Part 1 “Code of practice for loading”

BS 8100-3 1999 Lattice towers and masts

Part 3: Code of practice for strength assessment of members of lattice towers and masts

Incorporating Corrigendum No. 1

BS 8100-4 1995 Lattice towers and masts

Part 4: Code of practice for loading of guyed masts

BS 8102 1990 Code of practice for

Protection of structures against water from the ground

BS 8103-1 1995 Structural design of low-rise buildings

Part 1: Code of practice for stability, site investigation, foundations and ground floor slabs for housing

Incorporating Amendment No.1

BS 8103-2 1996 Structural design of low-rise buildings

Part 2: Code of practice for masonry walls for housing

BS 8103-3 1996 Structural design of low-rise buildings

Part 3: Code of practice for timber floors and roofs for housing

BS 8103-4 1995 Structural design of low-rise buildings

Part 4: Code of practice for suspended concrete floors for housing

BS 8110-1 1997 Structural use of concrete

Part 1: Code of practice for design and construction

Incorporating Amendment No.1

BS 8110-2 1985 Structural use of concrete

Part 2: Code of practice for special circumstances

Reprinted, incorporating Amendment No.1

BS 8110-3 1985 Structural use of concrete

Part 3: Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns

BS 8204-1 1999 Screeds, bases and in-situ floorings

Part 1: Concrete bases and cement sand levelling screeds to receive floorings – Code of practice

BS 8204-2 1999 Screeds, bases and in-situ floorings

Part 2: Concrete wearing surfaces – Code of practice

BS 8204-3 1993 Screeds, bases and in-situ floorings

Part 3: Code of practice for polymer modified cementitious wearing surface (Incorporating Amendment No.1)

BS 8204-4 1993 Screeds, bases and in-situ floorings

Part 4: Code of practice for terrazzo wearing surfaces

BS 8204-5 1994 Screeds, bases and in-situ floorings

Part 5: Code of practice for mastic asphalt underlays and wearing surfaces

BS 8301 1985 Code of practice for

Building drainage

(Formerly CP 301)

Reprinted incorporating Amendments Nos.1 and 2

BS 8666 2000 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete

BS EN 61773 1997 Overhead lines — Testing of foundations for structures

Including Corrigendum March 1997

CP 2012-1 1974 Code of Practice for

Foundations for machinery

Part 1: Foundations for reciprocating machines

Incorporating Amendments Nos.1 and 2

CP 8004 1986 Code of practice for

Foundations

(Formerly CP 2004)

EUROCODE 1 part 4 1996 Eurocode 1:

Basis of design and actions on structures

Part 4: Actions in silos and tanks

EUROCODE 8 part 4 1999 Eurocode 8:

Design provisions for earthquake resistance of structures

Part 4: Silos, tanks and pipelines

List of British Standards (BS) - Civil Engineering

Historical Discussions

Popular Posts

Buddhist Chanting

Stock Trading Tips..

Live On Site

Blog Archive